2.
Take the plastic form. I have - it is the case in the form of eggs. In its upper part was mounting another for one detail, which I cut off. Skin-tight form of a thin film of food. If you do not have a similar shape - can be taken as a basis for something else. In my profile is a blue box, I did it on the packaging of cotton sticks, reducing the height of the formation of the main body, and the yellow box is made on the basis of a jar of cream, with both sides formed on the lid of the jar as to obtain a round shape.
Strips for rezhu hand cutter. From 5 mm strips preparing skeleton line. I choose to frame lines, neutral color. Based on his experience, I advise you to glue strips of two.This would give a strength-based, and subsequently will not lead to deformation. Forwarding an one strip around the circumference, excess cut off, the end of the strip is glued. I use ordinary PVA.
4.
Glue four diagonal frame strips, securing with glue at the intersection. (His first such box I made three diagonal strips. Harder bit, but somehow I like it more.) Flowers prepared me in advance. They need 50-60 pieces. Do the standard scheme: 10mm strips cut into a fringe on 2 / 3 width. My working scissors taking nine bands simultaneously. When cutting fringe shift strips to length and width, adjust the width of the cutting process, and the difference in length, not cutting, finish cutting the fringe. I love fluffy flowers, so I try to cut thinner fringe. What's interesting: the shift in length, the fringe of the lower strips get thinner than the upper. Glue together a 5mm strip - middle, and fringed strip. Tight twists, beginning with a thin strip, "tail" anchoring adhesive. After drying it straight the fringe. The flower is ready.
5.
Glue flowers on a framed strip as close as possible to each other. Tried to base the flower above the lower edge of the strip, or cover the box will "sit" on the basis of alignment.
6.
Apply the adhesive strips on the diagonal and close "seats" on them flowers. Now we need time to glue dried up.
7.
Begin to fill the gaps between the carcass lines. The adhesive can be applied directly to flower petals and 'implanting' on them next.
8.
You can apply glue to the back of the flower and plant "it in place, but in any case, once the flower is better to stick after the glue from the previous flower petals differently will depart from each other and a bunch of get disheveled.
9.
For example, I prokleivayu flowers at the top and bottom of the gap, and after the glue has dried turn to the foldout tsenralnoy part of the lumen. If you have any gaps, fill them the same way. The upper part is ready. When completely dry take off the workpiece from the base, gently pushing her in a circle.
10.
Start manufacturing the bottom of the box, it also fits the film. Frame bar one - in a circle. I take it in the tone of parts. 5mm strips rezhu half, doing delicate coil diameter of 8mm. Form of these form the "square".
11.
Hang a framed line of squares, not exceeding the upper limit of the strip. I took a number of 23 squares.
12.
When the glue dries carry out the second row. Nanoshu glue on the parts of a circle and begin to glue parts, in addition, using a toothpick nanoshu glue on the lateral surface of the adjacent square. If you work in a manner surplus adhesive that dries invisible and will not deliver much difficulty in removing the blank with the basics. After the glue in this way fulfill the third row.
13.
I am pasting the details, keeping the weight of the workpiece, holding glued parts to the base. Series on the rounded all still have to hold, clasped her hand, otherwise the details will depart from the base. I have not thought of what they hold up to dry.
14.
The second and third row tend to straighten up. You can just press them to the base and wait a while until they "get used" to its position. I have for these series, in order to save time, use the pharmacy gum. Clutching a number of gum, the details sometimes depart from their seats, they just need to tweak.
15.
Starting with the fourth series of the amount of detail on the number will decrease exponentially.
16.
At the expense of fixing the bottom of the foundation, I can not neatly glue the last square. Therefore, take off the workpiece and the shape in this form, and then pasted the last square.
17.
Sketch coasters never components in advance. Often made of the fact that there is at hand. At this time, "hand" were the following parts: I - a dense coil of a 5 mm strip, II - a form of "drop" in diameter from 8mm ½ strips, III - leaves are made as follows: from the tracery of coils (one strip of 5mm diameter 18mm) formed form of "semi-circle, two semicircles of different shades glued together along the flat side, then this integral part the shape of a" crooked eye "or" processed almonds, "as you like. a total of details stand in the form of a flower without a midway. middle of a" fill "bottom of the box. Stand is stable enough and easily and keeps the box with the contents.
18.
All parts are ready. Collect, install and admire.
19.
Beauty!
If something is unclear - ask.
No comments:
Post a Comment