Tutorial and ideas to make everything about toys, flower making , crochet, knit, embroidery, make handmade, make craft, folding paper, crafts, handicraft, tatting, knoting, origami, kirigami,recycling, scrapbooking, clay, toy,home decor, gardening ...
Tuesday, April 5, 2011
Herringbone in the technique of Iris folding
Shall cut strips of paper in three colors.Strip width should be twice larger than the pitch, plus the allowance of 2-4 mm.For our step width of the strip is obtained by 22-24 mm.The very first strip should be slightly wider, since they cover the outer contours of the Christmas tree.How much should bands at once is difficult to calculate.Better to cut them during the work.
Fold each strip in half lengthwise.
Cut out five bars for the trunk of different shades of size 35h20 mm.Fold them in half.
Draw on a cardboard silhouette of a Christmas tree.Cut out carefully it using stationery knife or scissors.Print or trace the Iris pattern.
Imposed a cardboard template on the inside.Slotted silhouette can be a bit more pattern.Attach a template, such as paper clips.All work will be done from the inside.
First, run the trunk.Few smazh adhesive portion of cardboard around the slot on the right side.Attaching the first strip.Fold line on the strip should sit along the lines on the template.To glue the second strip, you can lubricate the glue board from the top, bottom, and the previous strip.To strip were not disclosed, they can be a little glue in some places.Sometimes, this technique does not use glue and small pieces of sticky tape, which is fixed on the edges of the strip.
Fill out the strips of the entire trunk.
Take a very long and wide strip.First, simply attach it to work.Fold line should sit along the first line of Iris pattern.If the strip is too long - pruning it.By attaching a strip, a little brushing glue cardboard on the edges of the slot.
By attaching a strip of another color so that it coincided with the extreme right line pattern.
Attaching the bottom third strip on the lower boundary of the template.
Prepare your next strip of the first color.First use, measuring the desired length, pruning, and then pasted.Clay mazh not strip and sticking place!Use the glue a little bit, just to strip "grabbed".
Attaching the second lane the second color, align it to the next line of the template.
Attaching the second strip of third color along the following lines.Keep sticking to the same order.Strictly in a clockwise direction, strictly alternating color selections.Each time the strip will become shorter.At the end of the case will go to the small crop, cut off at the beginning.When in the end will be a little empty triangle, cover it with a piece of paper one of three colors.
Now you can turn the work and admire the result.You can paste and garlands to decorate the Christmas tree at their discretion.These and other Christmas trees, we met at the master class 12/13/2007 in about one hour.HAPPY NEW YEAR!